WF6 LED 30K MW M6 Recessed Downlight
Our WF6 LED 30K MW M6 recessed downlight brings professional-grade illumination to residential and light commercial spaces with a wafer-thin profile that installs in minutes. The integrated LED module delivers warm 3000K light through a matte white trim that blends seamlessly with any ceiling.
Designed for 6-inch cutouts, this lithonia lighting wf6 led 30k mw m6 fixture eliminates the need for recessed housing, making it ideal for remodel projects where attic access is limited. The Energy Star certified design consumes just 11 watts while producing 650 lumens, replacing traditional 65-watt incandescent downlights with 90% energy savings.
- 3000K warm white color temperature for inviting ambient lighting
- Wafer-thin 0.6-inch profile installs directly to ceiling without recessed housing
- 650 lumens output at 11 watts for exceptional energy efficiency
- Matte white (MW) trim finish integrates with standard ceiling textures
- Fits standard 6-inch ceiling cutouts in new construction or remodel applications
Ultra-Slim Wafer Design & Construction
The WF6 LED 30K MW M6 features our innovative wafer construction that measures just 0.6 inches thick, allowing installation in ceilings with minimal plenum space. The durable aluminum housing dissipates heat efficiently, while the polycarbonate diffuser distributes light evenly across the room without harsh glare or hot spots.
This low-profile design eliminates the recessed can entirely, reducing installation time to under five minutes per fixture. The integrated junction box accepts standard Romex wiring, and the spring-loaded retention clips secure the fixture firmly against drywall or plaster ceilings from ½-inch to 1-inch thick.
3000K Warm White Light Output & Color Rendering
The 3000K color temperature produces a warm, inviting glow that complements residential interiors without the yellow cast of 2700K bulbs or the clinical appearance of 4000K+ commercial fixtures. At 650 lumens, each WF6 LED provides sufficient illumination for 60-80 square feet of general lighting coverage.
With a Color Rendering Index (CRI) of 80+, the LED module accurately reproduces colors in fabrics, artwork, and finishes. The 110-degree beam angle delivers uniform wall-to-wall coverage in standard 8-foot ceiling heights, eliminating dark corners and uneven lighting patterns common with narrow-beam downlights.
Installation Requirements & Ceiling Compatibility
Installation requires a 6-inch circular cutout in the ceiling and access to standard 120V AC wiring. The fixture ships with an integrated junction box rated for direct connection to 14AWG or 12AWG Romex cable, eliminating separate electrical box installation.
The four stainless steel retention clips adjust to accommodate ceiling thicknesses from ½-inch to 1-inch, providing secure mounting in drywall, plaster, or tongue-and-groove ceiling materials. For remodel applications, simply cut the 6-inch hole with a standard hole saw, connect the wiring, and push the fixture into place until the trim sits flush.
More Energy-Efficient Recessed Lighting Solutions
What people are saying
WF6 LED 30K MW M6 Installation & Performance Questions
The WF6 LED 30K MW M6 is compatible with most leading-edge and trailing-edge LED dimmers from Lutron, Leviton, Cooper, and Eaton. We recommend the Lutron Diva DVELV-300P or Leviton Decora IPL06 for residential applications.
The fixture dims smoothly from 100% down to 5% without flickering or dropout. Always verify dimmer compatibility by testing with a single fixture before completing a full installation, as performance can vary based on total connected load and circuit wiring.
Yes, the WF6 LED 30K MW M6 carries an IC (insulation contact) rating, meaning it's safe for direct contact with all types of attic insulation including fiberglass batts, blown cellulose, and spray foam. The thermal management system is designed to operate efficiently even when completely surrounded by insulation.
The airtight construction also meets California Title 24 JA8 requirements, preventing conditioned air loss through the ceiling penetration. This makes the lithonia lighting wf6 led 30k mw m6 an ideal choice for energy-efficient construction where maintaining building envelope integrity is critical.
The WF6 LED requires a 6-inch diameter hole (5.75 to 6.25 inches acceptable) in the ceiling surface. Use a standard 6-inch hole saw to create the opening in drywall or plaster ceilings.
The fixture trim measures 7.25 inches in outer diameter, providing adequate overlap to conceal the cut edge and secure the retention clips. Ensure you have at least 0.75 inches of clearance above the ceiling surface to accommodate the fixture housing and junction box.
The 3000K warm white color temperature falls between traditional incandescent bulbs (2700K) and neutral white commercial lighting (4000K). It produces a clean, inviting glow that works well in living rooms, bedrooms, dining areas, and kitchens without the yellow cast of 2700K or the sterile appearance of higher color temperatures.
If you prefer the warmer tone of traditional incandescent lighting, consider our 2700K version. For task-oriented spaces like garages or workshops, the 4000K daylight model provides better color discrimination and visual acuity.
The WF6 LED 30K MW M6 carries a wet location rating, making it suitable for covered outdoor applications such as covered porches, eaves, and breezeways where the fixture is protected from direct weather exposure. It is not rated for open-air installation where rain or snow can directly contact the fixture.
The housing is sealed to prevent moisture intrusion, and the LED driver operates reliably in temperatures from -4°F to 104°F. For fully exposed outdoor locations, we recommend our dedicated outdoor-rated recessed fixtures with gasketed housings.
We back the WF6 LED 30K MW M6 with a five-year limited warranty covering defects in materials and workmanship under normal use. This includes the LED module, driver, and fixture housing.
The 50,000-hour LED life rating represents L70 performance, meaning the LEDs will maintain at least 70% of initial lumens after 50,000 hours of operation. In the unlikely event of premature failure, contact our technical support team with your proof of purchase for warranty service.
A general guideline is one WF6 LED 30K MW M6 fixture per 60-80 square feet for ambient lighting in rooms with 8-foot ceilings. For a 12×16 room (192 square feet), plan for 3-4 fixtures evenly spaced.
Space fixtures 4-6 feet apart and position them 2-3 feet from walls to minimize scalloping effects. For task-oriented areas like kitchen counters or reading nooks, increase fixture density or supplement with under-cabinet or directional lighting.